C/C++ 编程代写
当前位置:以往案例 > >CS c语言Assignment案例 CSCI 2132 Software Development
2020-01-16

CS c语言project案例 projects are due on the due date before 23:59. All projects must be submitted electronically via the course SVN server.

project 6
CSCI 2132: Software Development
Due April 1, 2019

projects are due on the due date before 23:59. All projects must be submitted electronically via the course SVN server. Plagiarism in project answers will not be tolerated. By submitting your answers to this project, you declare that your answers are your original work and that you did not use any sources for its preparation other than the class notes, the textbook, and ones explicitly acknowledged in your answers. Any suspected act of plagiarism will be reported to the Faculty’s Academic Integrity Officer and possibly to the Senate Discipline Committee. The penalty for academic dishonesty may range from failing the course to expulsion from the university, in accordance with Dalhousie University’s regulations regarding academic integrity.


General Instructions: How to Submit Your Work


You must submit your project answers electronically:



Changeinto your subversion directory on bluenose: .


Createa directory for the current


Changeinto your project directory: .


Createfiles inside the a5 directory as instructed in the questions below and put them under
Subversion control using . Only add the files you are asked to add!


Once you are done answering all questions in the project (or the ones that you are able to answer—hopefullyall), the contents of your a4 directory should look like this:


(You will also have executable programs and potentially some data files in this directory, but you

should not add them to SVN.) Submit your work using .



In this project, you are asked to develop a more powerful version of the uniq Unix tool we discussed earlier in the term. This project is broken down into multiple steps to divide the problem into incremental tasks. This type of incremental development that develops a simple but functional version of a piece of software first and then incrementally adds features is common in the software industry. It also helps to break a seemingly overwhelming task into smaller subtasks that suddenly do not seem that overwhelming at all anymore. In each step, you are expected to modify the solution you developed in the previous step instead of starting from scratch. For full marks, the code you submit should satisfy all the requirements stated in the final step. Solutions that address only a subset of the requirements earn partial marks.1

Recall that the uniq tool reads its input from stdin and sends the lines it reads back to stdout but drops every line that is identical to the line that immediately precedes it. The final version of the unique tool you are tasked to develop in this project has the following features:



Itdrops any line that is identical to a line read before, not only the immediately preceding line,
any line that came before it.

Itmust be able to deal with lines of arbitrary
It takes an optimal command-line flag -m. If this flag is provided, then it works in “multi-line mode”. In this mode, any line that ends with a backslash (\) is to be treated as a single line togetherwith the line that comes after  If a whole sequence of lines end with backslashes, then all of them must be joined to form one logical line. This is the same as escaping line breaks in Python source code, for example.


We break this into the following incremental steps:



Step 1: Recreate the functionality of uniq. In other words, you should check only adjacent lines whether they are identical.

Step 2: Extend your implementation of Step 1 so it checks for duplicate lines throughout the document, not duplicate adjacent lines. In the interest of an efficient implementation, you should use a sorting algorithm to sort the lines of the input, which guarantees that identical lines are stored consecutively. Now the solution in Step 1 can be used to eliminate duplicate lines. Note that there is no requirement in this step that the order of the lines in the document should be preserved in the output. In this step, you will simply use the qsort function provided as part of the C standard library to sort the lines.

Step 3: This step adds the last ingredient necessary to meet the first two requirements of the unique tool listed above. Specifically, you will create the illusion that each input line is considered in order and output if it is not equal to any line that you have seen before and dropped otherwise. This can be done by applying the solution from Step 2 but, before producing the final output, rearranging the lines that were not dropped by the code in Step 2 in the order they appeared in the input.

1You may be tempted to develop a tool that meets all the requirements in one shot instead of developing the solution incrementally. If you succeed, this will earn you the same marks as if you had developed the solution incrementally. However, the incremental approach outlined here is only slightly more work overall and each step is a much more manageable add-on to the previous step than implementing all the required functionality in one shot.  Also, if you get stuck with satisfying one   of the more advanced requirements, completing the earlier steps of this project ensures that you have a solution that at least earns you partial marks. Therefore, you are encouraged to follow the incremental approach outlined here.


Step 4: In this step, you need to check the command line arguments of the program, check whether

-m is the only argument and, depending on the outcome, activate multiline mode. Then, when reading input lines, you need to ensure that you collect all lines separated by escaped newline characters into a single line record internally. An added complication is that you should consider the inputs



This is \ a line


and



This is a\ line


to be the same as far as checking for duplicates goes, but in the output of the program, the line breaks of the line that is kept should be preserved. For example, for the input



This is \ a line
Another line This is a\ line



the output should be



This is \ a line
Another line



To accomplish this, you need to keep a record of where the line breaks were in the input.

Step 5: The final step is to replace the qsort function with your own implementation of Merge Sort.  In general, it is a better idea to use functions already provided as part of a library unless these library functions are inadequate for some reason. You are asked to implement your own sorting algorithm here to make you practice writing recursive functions.



The remainder of this project states the requirement for each of these five steps in more detail and/or gives some hints that should be helpful in completing each step.


Step 1


Implement a C program unique.c that recreates the functionality of the uniq tool by reading the input line by line and dropping each line that is identical to the line immediately before it. On the input

abc abc def abc def
your program should output

abc def abc def
the same output that uniq would produce.

While not strictly necessary for this step, it is important as a basis for subsequent steps that you read the entire input and store it as a sequence of lines.  Specifically,  you should represent the input text    as a struct that stores the number of lines in the input and the text as a field of type char **. This char ** points to a dynamically allocated array of char pointers. Each of these pointers points to a dynamically allocated char array that stores a single input line.

You need to deal with two potential complications:



There is no upper limit on the length of each input line. Normally, this would force you to allocate an array of a certain minimum size for each line and then resize this array if it is not largeenough to hold the current line. Thankfully, the getline function can be used in a fashion that does this work for you. Read its manpage to find out how you can get it to return a dynamically allocated character array that stores the read input
You do not know the number of input lines in advance. Thus, you have to allow the array of pointers to the individual lines to To do this, you need to allocate a larger array once your current array is full, copy the elements of the current array to the new array, and finally free the current array and start using the new array. In order to avoid a quadratic running time resulting fromexcessive copying, the new array you allocate should be twice as big as the current array.
For checking consecutive input lines that are the same, you can use the strcmp standard library function. Read its manpage to find out how to use it.

An important requirement for your program is that it should not leak any memory. Since all memory still held by a process is released when the process exits, there is technically no effort required on your part to meet this requirement. However, it is important for you to practice how to manually manage allocated memory over the course of a longer-running program. Thus, for full marks you need to explicitly release all memory allocated to your program before the program exits. Specifically, you need to call free on the char array holding each line and on the array of char pointers referring to these char arrays. In later steps, you will add a few more dynamically allocated arrays that you will also have to release.


Step 2


Your strategy in this step should be to sort the lines in the input so identical lines in the input are stored consecutively. Then you can eliminate consecutive duplicate lines as in Step 1. There is no need to preserve the order of the input lines in the output. For example, on the input



def abc abc def


you are allowed to produce the output



abc def


To accomplish this step, you need two ingredients:



A function that can sort an array of data items, the array of char pointers representing the input lines in this
A comparator function that is used by the sorting function to determine the correct order ofpairs of input


For the latter, you should use the strcmp function again, with a twist. For the former, you should use the qsort sorting function provided by the C standard library again.

As you can see in the documentation of the qsort function, it calls the comparator function with pointers to the two data items to be compared as arguments. This creates a small wrinkle here: The items we want to sort are of type char *, since this is how we represent each input line. Thus, the arguments passed to the comparator function by qsort are of type char **. strcmp, however, expects to arguments of type char * (because it is meant to compare two strings, not two pointers to strings). Therefore, you need to write a wrapper for strcmp suitable to be used by qsort. All this wrapper needs to do is dereference its char ** arguments to obtain to char * values that can be passed to strcmp, call strcmp on these two char pointers, and then return the result.

To complete this step, all you need to do is to combine the discussed ingredients:



Sort the lines of text using qsort and your strcmp
Eliminateduplicate lines using your solution developed in Step
Printthe lines that remain as in Step

Step 3


Next you need to modify your code so the lines that are included in the output are output in the same order as they appear in the input. For the input



def abc ghi abc def


this means that the output should be



def abc ghi


not



abc def ghi


(Recall that, of all identical lines in the input, the first one should be kept.)

The strategy is fairly simple: You sort the input lines and eliminate duplicates as in the previous step. Then you rearrange the remaining lines in their original input order and output the resulting list.

To support this, you need to



Number the lines that you read in the order you read them and change your representation of each input line from a simple char * to a struct that stores the line number and this char*.
Change your sorting step from Step 2 so it sorts the lines by their content and identical lines by their line numbers. This is a simple extension of the comparison function for pairs of lines yur developed in Step 2 and ensures that the elimination strategy from Step 1 indeed keeps the first linein each set of identical
Restore lines to their original order after eliminating duplicates. You do this by sorting the lines that were not eliminated a second time, this time only by their line numbers, ignoring their contents. To do so, you need to implement a second comparison function that compares lines by line


Step 4


Here, you add the ability to invoke unique with an optional command line flag -m. You should parse the command line as practiced in Lab 7.  unique can be invoked without command line arguments     or with the -m argument. Any other set of command line arguments should be rejected with an error message.

The -m flag turns on “multi-line mode”.  This means that lines that end with a backslash (\) should     be treated as if they were one line with the one that comes after it.  A sequence of multiple lines that  all end with backslashes should be treated as a single “logical line”. The backslashes should not be included in this logical line. Thus, the input



A little \ dwarf built\ a house
on a hill

A little dwarf \ built a house



should be treated as if it were the input



A little dwarf built a house on a hill
A little dwarf built a house



Duplicate elimination transforms this into



A little dwarf built a house on a hill


The output of your program should preserve the line breaks from the input, that is, this sequence of lines produced by eliminating duplicates should be printed as



A little \ dwarf built\ a house
on a hill



because this is the way the first A little dwarf … line was broken in the input.

The interesting part in this step is how to treat lines separated by escaped newline characters as single lines when eliminating duplicates but preserve line breaks in the output. There are two ways you can do this.

The first is to eliminate the escaped newline characters from your internal representation of the line. This makes sorting and checking for duplicates straightforward using exactly the same strategy as       in Step 3.  However,  the string does not store any information about where the line breaks were in    the input. Thus, you need to extend your line representation so it includes an array of the line break



positions. When outputting the lines that are not dropped, you can then use the array of these line break positions to recreate the line breaks in the output.

The second option is to preserve all escaped line breaks in your internal representation of each line. This means that you can simply print each line that is part of the final output without the need for any special handling. Sorting and checking of duplicates, however, requires you to implement your own string comparison function, one that ignores escaped line breaks, that is, treats them as if they weren’t present at all.


Step 5


We will discuss Merge Sort in class. Implement this algorithm and use it instead of qsort as your sorting function. Your mergesort function should be a drop-in replacement for qsort, that is, it should have the prototype:



void mergesort(void *array, size_t n_elems, size_t elem_size, int (*cmp)(const void *, const void *));


(The description of this step is deceptively short. It is by far the most complicated step of this project.)

在线提交订单