案例Computer Hardware Lab_04: Accumulator and Multiplier using Booth AlgorithmPurpose:
To understand the basic usage of sequential statement.

Computer Hardware Experiments
Lab_04: Accumulator and Multiplier using Booth Algorithm

Purpose:案例Computer Hardware



To understand the basic usage of sequential statement.

Part 1: In this part,案例Computer Hardware you are going to design an accumulator using IF statement. The accumulator is written as the formula as below:



Here, A is an input signal, SUM is an output signal. A clock signal (e.g. clk) should be used. 案例Computer Hardware，The accumulator performs one operation according to clk (clk’event and clk = ‘1’). N is set as 10000 initially.



Part 2: In this part, you are going to implement a 16-bit Multiplier using VHDL language. 案例Computer Hardware，Your VHDL programs will perform multiplication operation as well as the algorithms indicated in the flow charts as below:





Understanding the Multiplier:

案例Computer Hardware



You need to implement the multiply operation as .



You can use sra operator for shift right arithmetic.





And then, you need to write the experiment report.



The report should be composed of

The VHDL source code;
The simulation waveform.